Best Mountain Bike Stems Reviews 2021 – To Improve Your Riding Skills

(Disclosure: I research online to find the best products, and As an Associate, I earn from qualifying purchases.)

Best mountain Bike Stems

MTB bikers tend to care for every part of their cycle. But there is a myth among them. They think the small parts are insignificant such as mountain bike stem. Since its only job is to hold the handlebar, they think it is not important to use a good stem.

But what they don’t know is a bike’s performance depends on the stem. Especially for long rides, having a good stem is a must. A good stem will provide you the sturdy and perfect balance. When riding in cocky roads you will feel less discomfort.

The result shows that most of the cyclist don’t know their way around when searching for a good stem. If you believe you belong to those group then don’t worry. We put together a lot of research to make this article which will cover everything about the stem. So without doing any delay let us see the best mountain bike stem available in the market. I tested some of the stems. Here are the 11 best Mountain bike stems for you to select.

Comparison Table Of 11 Best Mountain Bike Stems




Our Rating


Wake Mountain bike stem

CNC machined 6061 T6 aluminum alloy


5 out of 5

Fomtor raiser mountain bike stem

CNC machined 6061 T6 aluminum alloy


4.5 out of 5

Wake mountain bike 0-60 degree adjustable stem

Aluminum alloy AL6061 T6


4.2 out of 5

Fomtor mountain bike stem

CNC machined 6061 T6 aluminum alloy


5 out of 5

Bavel short mountain bike stem

6061 Aluminum alloy


4.5 out of 5

Wake short mountain bike stem

CNC machined 6061 T6 aluminum alloy


5 out of 5

RaceFace respond mountain bike stem

6061 aluminum


4.2 out of 5

RaceFace Atlas Mountain Bike Stem

6061 T6 aluminum


4.0 out of 5

Truvativ Hussefelt Mountain bike Stem

Forged AL-6061-T6


4.0 out of 5

RaceFace Ride Mountain Bike Stem

Aluminum 6061


3.5 out of 5

Renthal Apex Stem

2014 aluminum with 7075 aluminum braces


4.5 out of 5

Top 11 Best Mountain Bike Stems Reviews

1. Wake Mountain bike stem

The widespread short handlebar stem is perfect for most modest street bicycles. The width of the diameter is 31.8 mm. The weight of the stem is 130g. This pursues from the way that it has been developed of high-quality CNC machined 6061 T6 aluminum alloy.

What’s more, the stem has a simple establishment highlight and you just need to connect up the first front fork stem. A four jolt bar brace holds the bar safely in one place. It makes this stem an appropriate choice for overhauling your bicycle, going for downhill adventures.

With all these set up, Wake assured you perfect safety. You can easily execute your best move without the bar banding flabby. There is almost zero chance of getting wound into awful shape when you have to travel through unusual domains easily.

Architects considered dexterity and simplicity of establishment when they were structuring this stem. Because it just takes a short time to verify it onto your bicycle. You will fell the advantage of this stem immediately after the setup.

The high stability and strength that comes with this stem make it a perfect choice for upgrade or replacement. After the setup, everything will be flawless and this gives you a more drawn out life out of the bicycle.

Things We Like

  • Provide less leaning.
  • Suitable for tall people.
  • Maximum control over steering.
  • Extreme durability.
  • Precise craftsmanship.

Things We Don’t Like

  • Need an additional spacer.
  • Some might face problems regarding the bolts.

2. Fomtor raiser mountain bike stem

If you are looking for a lightweight stem in mid-range then Fomtor raiser MTB stem is best for you. This stem is a perfect replacement for a 110 mm stem. You will receive a 70 mm stem with a raiser. But you have to keep in mind that with the raiser, the functional length of your stem will be less than 70 mm. With added reach, you will find a 35-degree rise angle, 57 mm of functional stem length.

The quality and finish of this stem are exquisite. The diameter of the handlebar needed to be 31.8 mm for the stem to fit perfectly. If not then you might expect some sort of creaks and pops. The size of the front fork stem diameter is 28.6 mm. Fomtor raiser stem is very lightweight. The weight of the stem is just 140g. 

This stem is made of highly constructed CNC machine 6061 T6 aluminum alloy. With all these features you can certainly have a rough idea of the strength. Fomtor raiser stem will fit perfectly with any kind of bicycle, like a road bike, BMX, Downhill, mountain bike or even track bike

Fomtor raiser stem can also be used with a carbon fiber fork. So you don’t have to worry about the fork material. You will not be receiving any shims for the handlebar. 

Things We Like

  • Perfectly weighted for extreme comfort.
  • Best for correct positioning.
  • Tight and stable.
  • Reliable.
  • Good at handling weights.

Things We Don’t Like

  • Fits perfectly with most handlebar but not all.
  • Need perfect fitting to get rid of the creaks.

3. Wake mountain bike 0-60 degree adjustable stem

There is actually not much difference between Wake MTB stem and Wake MTB 0-60 degree adjustable stem. Like the MTB stem, the width of the handlebar diameter is 31.8 mm. However, the width of the steerer tube diameter is 28.6 mm. This is a medium weight stem. Unlike the 130g of Wake’s MTB stem, it has a weight of 290g. Well, the weight is understandable since it has an adjustable mechanism attached to it.

It has a four bolt bar clamp which holds the handlebar firmly and securely in one place. Both the stem is very easy to install, you just have to connect up the first front fork stem. Highly tampered and strongly constructed AL6061 T6 aluminum alloy has been used to build this stem

Because of aluminum it a rust free stem. But the best part of this stem is the adjustable mechanism. You can easily set a suitable degree of adjustment to suit your height. That’s why it is popular among many people with different heights. 

The length of the stem is 110 mm. Like the no adjustable version it has a perfect balance. It holds the handlebar firmly so that you don’t feel any discomfort in bumpy roads. As a universal stem, it fits perfectly in any mountain bike. But it is best suited for a mountain bike and a road bike. 

Things We Like

  • Variable geometry.
  • Adjustable neck.
  • Usually don’t discriminate among height of the rider.
  • Excellent quality.
  • Rust proof.

Things We Don’t Like

  • Bit heavy in weight.
  • Fittings need to be perfect otherwise you will notice creaks.

4. Fomtor mountain bike stem

Like most other common stems, this stem is made for handlebar with a diameter of 31.8 mm. As usual, the width of the front fork stem diameter should be 28.6 mm. The distance from the center of the two holes is 80 mm.

The build quality is solid and sturdy. As for the finish, you will get a high-intensity matt black stylish stem. The four bolt clamp will hold the handlebar tightly. You can safely ride any mountain tracks without any tension. The fomtor stem is very easy to set up with the cycle. Anyone can simply set it up with the cycle by connecting it to the front fork.

But there is a matter you should never forget. Since it is not a raiser stem or there is no option for the adjustable angle. So, it will surely tend to shift the rider in the front. That’s why before buying it you have to make sure that you are okay with the aggressive pose it will provide.

Things We Like

  • Lightest weight.
  • Aggressive pose.
  • Strong build.
  • Clean finish.
  • Compatible design.

Things We Don’t Like

  • Might put extra pressure on hands.
  • No chance of raising the handlebar.

5. Bavel short mountain bike stem

Riders usually don’t use short stem. Short stem is usually used for better reach to the handlebar. Another cause of using short might be the comfort of riding. We all know leaning forward is the best way of riding cycle but it also put pressure on the hand. As a matter of fact, for the new riders, it will be difficult to ride for long times. But, using a short stem one might eradicate this difficulty.

Bavel short stem is one of the lightest and strongest stem available in the market. The weight of the cycle is only 203g. So you can easily fit this stem on your cycle for a lightweight fitting. The most probable use will be for the kid’s cycle. Since we can’t predict the kid’s growth. Buying a small cycle will not be beneficial. So for instance, you should buy a regular size cycle and use this stem for a close reach to the handlebar.

With a diameter width of 31.8 mm and front fork diameter width of 28.6 mm, this is one of the best stylish shot stems. High forged 6061 aluminum allow has been used for making these stems. Two bolt clipper is used to attach the stem to the front fork and four bolt clamp is used for the handlebar. Though this stem won’t give you the perfect aggressive edge you will surely feel extreme control.

Things We Like

  • Extra muscular build.
  • Ergonomic black finish.
  • Rust-proof aluminum body.
  • Control over the handlebar.
  • Safety.

Things We Don’t Like

  • Bolts needed some improvement.
  • Not suitable for long rides.

6. Wake short mountain bike stem

Wake has the reputation of producing some amazing mountain bike stem. They have both short and long, raiser and changeable angle stem. And most of all the shine with every type of stem the produce. Like that, the Wake short MTB stem is one of kind product in their production line.

Wake short stem is made for the relatively thin handlebar. The diameter width of the handlebar that this stem is suitable for is 25.4 mm. But the width of front fork steerer tube is as usual with a width of 28.6 mm. The length of the stem is 60 mm. The measurement starts from the center of the two holes. 

It has a very exquisite and muscular build. The design pattern is rather unique. One can call it a molded design with no extra space in between. But all those molded structures this stem is very light. The weight of the stem is only 160g. 

It consists of a four bolt clamp system which holds the handlebar. A two bolt clamp is used for holding the front fork. It is made of high-quality CNC 6061 aluminum alloy. Since it is made for universal use, any types of the cycle can be compatible with the stem. But we have to make sure the handlebar diameter. Though short stem is not preferable in general one can easily use this gem for uphill and downhill ride easily.

Things We Like

  • Unique design.
  • Best for kid’s bike.
  • Lightweight and sturdy.
  • Black and clean finish.
  • Easy to install.

Things We Don’t Like

  • Not suitable for all rider.
  • No long rides.

7. RaceFace respond mountain bike stem

We always thought that all entry level stem is for people with low end budget. It’s actually true. For most cases all the low end brand produce one or two entry level product for marketing purpose. But when it comes to Race Face that is not the case.

The Race Face Respond stem is one of those segments that makes you question whether you have to spend super bucks on parts. Arriving in a shade under cheap price, it looks superior to somewhere in the range of a ton of increasingly costly stems.

The stem is fashioned from 6061 aluminum and after that shot peened to make a hard wearing completion. The faceplate is machined out for exactness and a cozy fit with the handlebar. It has a conventional four screw handlebar securing. So you should be mindful about equitably strain every one of the four of the steel fasteners.

Unlike any other stem Respond has interlocking U-shaped handlebar clamp. This awesome geometry keeps weight away from the bolts and transfer it to the stem body. Weight wise the Ride isn’t excessively assembled, the 195g load for the 70mm variant is lighter than numerous stems twofold the cost.

Weight wise the Ride isn’t excessively assembled, the 152g load for the 70mm variant is lighter than numerous stems twofold the costWe had no serious issues with respect to flex from the 70mm length, however because of the idea of the expected use we kept bar width down to under 720mm. Stack stature is generally normal at 39mm so should fit instead of most of the stems.

Things We Like

  • U-shaped Clamp.
  • Strong.
  • Solid.
  • Quick installation.
  • Durable construction.
  • Stronghold on the handlebar.

Things We Don’t Like

  • Not too much suitable enduro.
  • A little heavy.

8. RaceFace Atlas Mountain Bike Stem

At the point when the famous pewter Race Face stems originally touched base available. They were instrumental in opening up potential outcomes for mountain biking. They made quite a big jump in quality with those stem. Because of what they did we can enjoy the joy of advance machineries in MTB. The Race Face Atlas Stem keeps that unique’s achievements alive by giving DH quality in an aluminum bundle that is light enough for XC

This makes the Atlas ideal for the cutting edge all-off-road bicycles and downhill-race. It’s developed from 6061 T6 aluminum and utilizes a four-jolt bar clasp that holds the bar safely in position. To achieve this, Race Face utilizes an interlocking U-molded faceplate.

Contradicting steerer tube jolts give extraordinary bracing force, without harming the steerer tube. The Atlas has laser-scratched logos. Also included edge inclinations that relate with Race Face handlebars, just as bar revolution for exact fit changes. The Race Face Atlas Stem comes in two lengths — 50 or 65mm, with zero ascents. It’s good with 1.125in steerer tubes and 31.8mm handlebars.

portion of the ​RaceFaces handlebar models is aluminum, while others are produced using carbon fiber. Together with RaceFace handlebar and Atlas stem, this setup gives a wonderful riding knowledge. The Atlas stem is secure, firm, and solid.

Things We Like

  • Super cool design.
  • Stylish finish.
  • No flex.
  • Excellent graphics.
  • As an AM stem it is pretty light weighted.

Things We Don’t Like

  • Not designed for the rider who prefers classic looks.
  • A bit pricey.

9. Truvativ Hussefelt Mountain bike Stem

This is an arrangement you cannot beat, particularly for the short 40-60mm stem that is developing increasingly famous. This stem likewise works for a dominant part of bars and forks that are available so it is flexible. Not exclusively is it an incredible piece on an AM rig, yet It has also been seen this precise stem on various earth jumpers.

Not once have I at any point found about anybody breaking a Hussefelt stem, these things are quite solid and burly. The level dark completion is perfect and the decals are not stickers, they are painted/stenciled on. You will feel as though you ought to have paid threefold the amount of for this stem.

The most preferred part about this stem is the crude completion on the front that spells “Hussefelt”. It gives it an entire top of the line look that is additionally one of a kind. The jolts that unite everything are first class and add to the nature of the stem. In the event that you are not a weight Nazi endeavoring to shed each ounce you can. I don’t think there is any reason not to purchase this 203-gram stem. 

This is an ideal stem on the off chance that you are attempting to keep it shoddy and still appear as though you realize what you are doing. Which is actually quite difficult.

Things We Like

  • Relatively cheap.
  • You can use 5mm Allen bolts.
  • Sturdy build.
  • Strong clipper.
  • Pretty cool logo.

Things We Don’t Like

  • Pretty heavy though.
  • Not anodized.

10. RaceFace Ride Mountain Bike Stem

An ideal complement to your Ride bar and seat post. The Ride stem is structured explicitly for riders searching for Race Face designing and quality at an esteem value point. This stem is pleasantly structured. Its appearance is so appealing, and it is an ideal match for any off-road bicycle. 


The clamp configuration is a four jolt one. This will serve to upgrade most extreme verifying in the situation of the stem to your bicycle.

The stem comes in dark shading making it mix well with some other shade of your bicycle. In the event that you are a woman, and your worry is shading, at that point this stem meets your requirements.

The material it is produced using is aluminum 6061. It is fashioned and peened making it offer high quality and exhaustion obstruction at a sensible cost. The stem is, subsequently, sturdy.

The stem weight is not as much as Race Face React Off-road Bicycle Stem gauge. It weighs just 140 grams making a pleasant choice for long separation riders. As it will offer less protection from the breeze since it doesn’t add more weight to the general load of the bicycle.

Since it features the most common handlebar diameter 31.8 mm, it will fit with any kind of cycle. The clamp is made of 4 bolts so you have to take special care to it. You have to lose all the screw equally and also tight them equally.

Things We Like

  • Versatile.
  • Attractive design.
  • Easy to install.
  • Compatible for extreme export.
  • Expensive looks.

Things We Don’t Like

  • Available in longer lengths.
  • No raise capabilities.

11. Renthal Apex Stem

This Renthal Apex Stem consolidates all-mountain quality with enduro firmness at a lightweight. It is the fundamental factor for cross-country. This MTB stem is a cross breed of the extraordinary segments fundamental for an incredible off-road bicycle ride

With special 240-degree handlebar clips that permit a great part of the stem body material to be evacuated. Which means this MTB stem tips the scales at 118 grams. The Apex Stem holds the quality and firmness requested by current, wide handlebars. It includes completely CNC machined and highlighting a larger than average focus bore. It has broad 3-D machining and outer webbing to augment auxiliary quality and solidness. This Renthal Apex Stem is a major move up to a little part. 

The Renthal Apex is CNC machined from a strong billet of 2014 aluminum with 7075 aluminum braces. These materials were picked with care, to give the most astounding solidarity to weight proportion. The clips are embedded over the little width area of the handlebar and slid into the inside. It gives a 240-degree wrap of the handlebar. 

The stem body can be turned to give either an in addition to 6 degree or short 6-degree rise. This enables the right bar tallness to be accomplished with any wheel size or head tube length. Broad 3D machining and outer webbing increment the torsional firmness of the stem, while downplaying weight.

Things We Like

  • Top notch craftsmanship.
  • Unique design.
  • Light style.
  • Extremely light.
  • Delicate finish.

Things We Don’t Like

  • Not too strong.
  • Design somehow looks weak.

How To Choose Mountain Bike Stem (buying guide)

The correct stem for your MTB bicycle will rely upon various components. The most significant being the stem type, materials, and measurements.

MTB stems set up on handlebarMTB stems set up on handlebarMTB stems set up on handlebarMTB stems set up on handlebarMTB stems set up on handlebarMTB stems set up on handlebar

1. Stem type

By far most of the MTB stems available today are of the Aheadstem configuration. Which jolts legitimately onto a fork’s steerer tube. The module plume configuration can be found on more established or less expensive bicycles

2. Stem materials

Aluminum alloy still by a long shot the most widely recognized stem material in low-to mid-spending stems. Yet carbon fiber models are accessible at the top end of the market. They shine with their allure for the most part among racers both on-street and off. 

3. Measurements

Stems are accessible to fit a scope of steerer tube sizes with 1/8″ which is most widely recognized on both MTB and street bicycles. Be that as it may, a few models are additionally accessible for more established bicycles. They come with 1″ steerer or for gravity bicycles with 1.5″ steerer tubes. 

A scope of brace sizes is likewise accessible to fit the distinctive handlebar breadths. MTB bars are generally 25.4mm (standard) or 31.8mm operating system in breadth. With the last standard now really the most recognized inferable from its properties of solidarity and firmness.

How to choose the best stem length for you?

It is a three-way process:

Stage 1

Lift your leg over the bicycle to straddle the edge. Lower yourself onto the seat, and spot your feet level on the floor. Broaden your arms toward the handlebars, and grab hold of the grasps.

Stage 2

Analyze the ebb and flow of your arms to decide whether the stem relates with your physical measurements. Pick a stem that is 20mm to 30mm littler if your arms should completely stretch out to achieve the handlebar holds. Overhaul the measure of the stem if your arms twist at not exactly a 45-degree edge. 

Stage 3

Select a stem as indicated by your kind of biking. Utilize an 80mm to 120mm stem to guarantee a streamlined riding position on cross-country, MTB landscape. Select a stem with a shorter length for expanded dealing with and solidness on a declining MTB course. Pick a model that includes a progression of spacers in the event that you have to change the length of your bicycle stem effectively and rapidly.

What is the best width for mountain bike handlebars?

The width of the mountain bike varies in many aspects. One is bike wise & other is body wise.

1. Bike wise

XC Bicycles: 680mm – 740mm bar width

For XC bicycles, utilizing a more drawn out stem improves position on the bicycle to put out more power proficiently. Smaller bars are utilized for this situation to keep your chest open when inclining forward in a climbing position.

Downhill Bicycles: 760mm – 800mm bar width

For downhill bicycles, utilizing a more extensive bar gives you a decent steady feel. You have more influence in the corners, and that all give you the certainty to ride all the more forcefully. Consider more extensive handlebars as having power control for your vehicle. 

Enduro Bicycles: 740mm – 780mm bar width

Handlebar widths for enduro bicycles are someplace in the middle of the two. From standard trail riding to the Enduro World Arrangement, having handlebars that give you the control. And steadiness on the downhill alongside being in an ideal accelerating position should be the case.

mountain bike stemmountain bike stemmountain bike stemmountain bike stemmountain bike stemmountain bike stem

2. Body Wise

It is essential to locate the correct handlebar width ideal for your body type and riding style. 

For shorter riders​

It is just normal to utilize smaller handlebars. Consider completing a push-up. On the off chance that your hands are a lot more extensive than your common position. You end up working a lot harder to complete one push up. Presently if your hands are near one another, again it’s unnatural and entirely flimsy. Locate an agreeable center ground for your body type and think about what kind of riding you will do. 

For taller or lankier riders

Utilizing a more extensive bar may be only the trap. A similar hypothesis applies here. On the off chance that you are tall with long arms, utilizing a more extensive bar will get you in a progressively normal riding position. And will give you more control over the bicycle.

adjustable mountain bike stemadjustable mountain bike stemadjustable mountain bike stemadjustable mountain bike stemadjustable mountain bike stemadjustable mountain bike stem

How does a shorter stem affect bike handling?

Changing the stem length not just effects your fit and solace, it influences the handling elements of a street bicycle. A shorter stem will result in snappier directing, a more extended stem will deliver slower controlling. Altering the stem length can be utilized to tailor the handling. That is for the most part why cyclocross races utilize a shorter stem, and long separation street cyclists decide on a more drawn out stem.

How do you measure handlebar diameter?

Take a piece of paper, crease it around the thickest part of the bar and mark the spot on the paper where the two finishes meet. At that point put the paper level, and measure from the conclusion to the mark you made. That will give you the outline. Divide that by 3.1416 and you’ll have the width. This isn’t excessively exact, yet there’s just a little arrangement of sizes to choose.

How do you measure handlebar diameterHow do you measure handlebar diameterHow do you measure handlebar diameterHow do you measure handlebar diameterHow do you measure handlebar diameterHow do you measure handlebar diameter

Final Thoughts

A bicycle stem may seem like a small part of the cycle. But actually, it is one of the most important parts. It will give you comfort as well as safety. That’s why choosing the best mountain bike stems is very necessary. You may not know anything about cycle stem. But, I really hope after finishing this article you will have a catch on how stem works and how to choose them. We have discussed many types of the stem, like shorter to longer stems, muscular to thinner build. Carefully read through the article and choose what is best for you.

More Reviews For You

[tcb_post_list query=”{‘filter’:’custom’,’related’:|{||}|,’post_type’:’post’,’orderby’:’date’,’order’:’DESC’,’posts_per_page’:’7′,’offset’:’1′,’no_posts_text’:’There are no posts to display.’,’exclude_current_post’:|{|’1’|}|,’queried_object’:{‘ID’:4350,’post_author’:’2′,’post_type’:’post’},’rules’:|{|{‘taxonomy’:’post’,’terms’:|{|’3721′,’3450′,’3015′,’1860′,’1616′,’1467′,’2400’|}|,’operator’:’IN’}|}|}” type=”list” columns-d=”1″ columns-t=”1″ columns-m=”1″ vertical-space-d=”0″ horizontal-space-d=”30″ ct=”post_list-43423″ ct-name=”Text Only 02″ tcb-elem-type=”post_list” pagination-type=”none” pages_near_current=”2″ css=”tve-u-16d7ba9da31″ vertical-space-m=”30″ element-name=”Post List” no_posts_text=”” total_post_count=”7″ posts_per_page=”7″ total_sticky_count=”0″ featured-content=”0″ class=” ][tcb_post_list_dynamic_style][/tcb_post_list_dynamic_style][tcb_post_title css=’tve-u-16d7ba9da4c’ tag=’span’][/tcb_post_list]

About the author

Sharif Hasan

Leave a Comment