Category Archives for Accessories

Best mountain Bike Stems

Best Mountain Bike Stems Reviews 2019 – To Improve Your Riding Skills

Introducing Top 11 Best Mountain Bike Stems Reviews

MTB bikers tend to care for every part of their cycle. But there is a myth among them. They think the small parts are insignificant such as mountain bike stem. Since its only job is to hold the handlebar, they think it is not important to use a good stem.

But what they don’t know is a bike’s performance depends on the stem. Especially for long rides, having a good stem is a must. A good stem will provide you the sturdy and perfect balance. When riding in cocky roads you will feel less discomfort.

The result shows that most of the cyclist don’t know their way around when searching for a good stem. If you believe you belong to those group then don’t worry. We put together a lot of research to make this article which will cover everything about the stem. So without doing any delay let us see the best mountain bike stem available in the market.

I tested some of the stems. Here are the 11 best MTB stems for you to select. 

Comparison Table Of Mountain Bike Stems

Product

Materials

Weight

Our Rating

Check Price

CNC machined 6061 T6 aluminum alloy

130g

5 out of 5

CNC machined 6061 T6 aluminum alloy

140g

4.5 out of 5

Aluminum alloy AL6061 T6

290g

4.2 out of 5

CNC machined 6061 T6 aluminum alloy

128g

5 out of 5

6061 Aluminum alloy

203g

4.5 out of 5

CNC machined 6061 T6 aluminum alloy

160g

5 out of 5

6061 aluminum

195g

4.2 out of 5

6061 T6 aluminum

150g

4.0 out of 5

Forged AL-6061-T6

203g

4.0 out of 5

Aluminum 6061

140g

3.5 out of 5

2014 aluminum with 7075 aluminum braces

118g

4.5 out of 5

Wake Mountain bike stem

The widespread short handlebar stem is perfect for most modest street bicycles. The width of the diameter is 31.8 mm. The weight of the stem is 130g. This pursues from the way that it has been developed of high-quality CNC machined 6061 T6 aluminum alloy.

What's more, the stem has a simple establishment highlight and you just need to connect up the first front fork stem. A four jolt bar brace holds the bar safely in one place. It makes this stem an appropriate choice for overhauling your bicycle, going for downhill adventures.

With all these set up, Wake assured you perfect safety. You can easily execute your best move without the bar banding flabby. There is almost zero chance of getting wound into awful shape when you have to travel through unusual domains easily.

Architects considered dexterity and simplicity of establishment when they were structuring this stem. Because it just takes a short time to verify it onto your bicycle. You will fell the advantage of this stem immediately after the setup.

The high stability and strength that comes with this stem make it a perfect choice for upgrade or replacement. After the setup, everything will be flawless and this gives you a more drawn out life out of the bicycle.

Things we like:

  • Provide less leaning.
  • Suitable for tall people.
  • Maximum control over steering.
  • check
    Extreme durability.
  • Precise craftsmanship.

Things we don't like:

  • Need an additional spacer.
  • Some might face problems regarding the bolts.

Fomtor raiser mountain bike stem

If you are looking for a lightweight stem in mid-range then Fomtor raiser MTB stem is best for you. This stem is a perfect replacement for a 110 mm stem. You will receive a 70 mm stem with a raiser. But you have to keep in mind that with the raiser, the functional length of your stem will be less than 70 mm. With added reach, you will find a 35-degree rise angle, 57 mm of functional stem length.

The quality and finish of this stem are exquisite. The diameter of the handlebar needed to be 31.8 mm for the stem to fit perfectly. If not then you might expect some sort of creaks and pops. The size of the front fork stem diameter is 28.6 mm. Fomtor raiser stem is very lightweight. The weight of the stem is just 140g. 

This stem is made of highly constructed CNC machine 6061 T6 aluminum alloy. With all these features you can certainly have a rough idea of the strength. Fomtor raiser stem will fit perfectly with any kind of bicycle, like a road bike, BMX, Downhill, mountain bike or even track bike

Fomtor raiser stem can also be used with a carbon fiber fork. So you don’t have to worry about the fork material. You will not be receiving any shims for the handlebar. 

Things we like:

  • Perfectly weighted for extreme comfort.
  • Best for correct positioning.
  • Tight and stable.
  • check
    Reliable.
  • Good at handling weights.

Things we don't like:

  • Fits perfectly with most handlebar but not all.
  • Need perfect fitting to get rid of the creaks.

Wake mountain bike 0-60 degree adjustable stem

There is actually not much difference between Wake MTB stem and Wake MTB 0-60 degree adjustable stem. Like the MTB stem, the width of the handlebar diameter is 31.8 mm. However, the width of the steerer tube diameter is 28.6 mm. This is a medium weight stem. Unlike the 130g of Wake’s MTB stem, it has a weight of 290g. Well, the weight is understandable since it has an adjustable mechanism attached to it.

It has a four bolt bar clamp which holds the handlebar firmly and securely in one place. Both the stem is very easy to install, you just have to connect up the first front fork stem. Highly tampered and strongly constructed AL6061 T6 aluminum alloy has been used to build this stem

Because of aluminum it a rust free stem. But the best part of this stem is the adjustable mechanism. You can easily set a suitable degree of adjustment to suit your height. That’s why it is popular among many people with different heights. 

The length of the stem is 110 mm. Like the no adjustable version it has a perfect balance. It holds the handlebar firmly so that you don’t feel any discomfort in bumpy roads. As a universal stem, it fits perfectly in any mountain bike. But it is best suited for a mountain bike and a road bike. 

Things we like:

  • Variable geometry.
  • Adjustable neck.
  • Usually don’t discriminate among height of the rider.
  • check
    Excellent quality.
  • Rust proof.

Things we don't like:

  • Bit heavy in weight.
  • Fittings need to be perfect otherwise you will notice creaks.

Fomtor mountain bike stem

There are very few differences between Fomtor raiser stem and Fomtro MTB stem. The main difference will be the absence of raiser. You will enjoy a slight 7 degree of raise which is close to nothing. But the most important thing that made stem popular is weight. This is among the most the lightest stem weighing only 128g.

Like most other common stems, this stem is made for handlebar with a diameter of 31.8 mm. As usual, the width of the front fork stem diameter should be 28.6 mm. The distance from the center of the two holes is 80 mm.

The build quality is solid and sturdy. As for the finish, you will get a high-intensity matt black stylish stem. The four bolt clamp will hold the handlebar tightly. You can safely ride any mountain tracks without any tension. The fomtor stem is very easy to set up with the cycle. Anyone can simply set it up with the cycle by connecting it to the front fork.

But there is a matter you should never forget. Since it is not a raiser stem or there is no option for the adjustable angle. So, it will surely tend to shift the rider in the front. That’s why before buying it you have to make sure that you are okay with the aggressive pose it will provide.

Things we like:

  • Lightest weight.
  • Aggressive pose.
  • Strong build.
  • check
    Clean finish.
  • Compatible design.

Things we don't like:

  • Might put extra pressure on hands.
  • No chance of raising the handlebar.

Bavel short mountain bike stem

Riders usually don’t use short stem. Short stem is usually used for better reach to the handlebar. Another cause of using short might be the comfort of riding. We all know leaning forward is the best way of riding cycle but it also put pressure on the hand. As a matter of fact, for the new riders, it will be difficult to ride for long times. But, using a short stem one might eradicate this difficulty.

Bavel short stem is one of the lightest and strongest stem available in the market. The weight of the cycle is only 203g. So you can easily fit this stem on your cycle for a lightweight fitting. The most probable use will be for the kid’s cycle. Since we can’t predict the kid’s growth. Buying a small cycle will not be beneficial. So for instance, you should buy a regular size cycle and use this stem for a close reach to the handlebar.

With a diameter width of 31.8 mm and front fork diameter width of 28.6 mm, this is one of the best stylish shot stems. High forged 6061 aluminum allow has been used for making these stems. Two bolt clipper is used to attach the stem to the front fork and four bolt clamp is used for the handlebar. Though this stem won’t give you the perfect aggressive edge you will surely feel extreme control.

Things we like:

  • Extra muscular build.
  • Ergonomic black finish.
  • Rust-proof aluminum body.
  • check
    Control over the handlebar.
  • Safety.

Things we don't like:

  • Bolts needed some improvement.
  • Not suitable for long rides.

Wake short mountain bike stem

Wake has the reputation of producing some amazing mountain bike stem. They have both short and long, raiser and changeable angle stem. And most of all the shine with every type of stem the produce. Like that, the Wake short MTB stem is one of kind product in their production line.

Wake short stem is made for the relatively thin handlebar. The diameter width of the handlebar that this stem is suitable for is 25.4 mm. But the width of front fork steerer tube is as usual with a width of 28.6 mm. The length of the stem is 60 mm. The measurement starts from the center of the two holes. 

It has a very exquisite and muscular build. The design pattern is rather unique. One can call it a molded design with no extra space in between. But all those molded structures this stem is very light. The weight of the stem is only 160g. 

It consists of a four bolt clamp system which holds the handlebar. A two bolt clamp is used for holding the front fork. It is made of high-quality CNC 6061 aluminum alloy. Since it is made for universal use, any types of the cycle can be compatible with the stem. But we have to make sure the handlebar diameter. Though short stem is not preferable in general one can easily use this gem for uphill and downhill ride easily.

Things we like:

  • Unique design.
  • Best for kid’s bike.
  • Lightweight and sturdy.
  • check
    Black and clean finish.
  • Easy to install.

Things we don't like:

  • Not suitable for all rider.
  • No long rides.

RaceFace respond mountain bike stem

We always thought that all entry level stem is for people with low end budget. It’s actually true. For most cases all the low end brand produce one or two entry level product for marketing purpose. But when it comes to Race Face that is not the case.

The Race Face Respond stem is one of those segments that makes you question whether you have to spend super bucks on parts. Arriving in a shade under cheap price, it looks superior to somewhere in the range of a ton of increasingly costly stems.

The stem is fashioned from 6061 aluminum and after that shot peened to make a hard wearing completion. The faceplate is machined out for exactness and a cozy fit with the handlebar. It has a conventional four screw handlebar securing. So you should be mindful about equitably strain every one of the four of the steel fasteners.

Unlike any other stem Respond has interlocking U-shaped handlebar clamp. This awesome geometry keeps weight away from the bolts and transfer it to the stem body. Weight wise the Ride isn't excessively assembled, the 195g load for the 70mm variant is lighter than numerous stems twofold the cost.

Weight wise the Ride isn't excessively assembled, the 152g load for the 70mm variant is lighter than numerous stems twofold the costWe had no serious issues with respect to flex from the 70mm length, however because of the idea of the expected use we kept bar width down to under 720mm. Stack stature is generally normal at 39mm so should fit instead of most of the stems.

Things we like:

  • U-shaped Clamp.
  • Strong.
  • Solid.
  • Quick installation.
  • check
    Durable construction.
  • Stronghold on the handlebar.

Things we don't like:

  • Not too much suitable enduro.
  • A little heavy.

RaceFace Atlas Mountain Bike Stem

At the point when the famous pewter Race Face stems originally touched base available. They were instrumental in opening up potential outcomes for mountain biking. They made quite a big jump in quality with those stem. Because of what they did we can enjoy the joy of advance machineries in MTB. The Race Face Atlas Stem keeps that unique's achievements alive by giving DH quality in an aluminum bundle that is light enough for XC

This makes the Atlas ideal for the cutting edge all-off-road bicycles and downhill-race. It's developed from 6061 T6 aluminum and utilizes a four-jolt bar clasp that holds the bar safely in position. To achieve this, Race Face utilizes an interlocking U-molded faceplate.

Contradicting steerer tube jolts give extraordinary bracing force, without harming the steerer tube. The Atlas has laser-scratched logos. Also included edge inclinations that relate with Race Face handlebars, just as bar revolution for exact fit changes. The Race Face Atlas Stem comes in two lengths — 50 or 65mm, with zero ascents. It's good with 1.125in steerer tubes and 31.8mm handlebars.

portion of the RaceFace's handlebar models is aluminum, while others are produced using carbon fiber. Together with RaceFace handlebar and Atlas stem, this setup gives a wonderful riding knowledge. The Atlas stem is secure, firm, and solid.

Things we like:

  • Super cool design.
  • Stylish finish.
  • No flex.
  • check
    Excellent graphics.
  • As an AM stem it is pretty light weighted.

Things we don't like:

  • Not designed for the rider who prefers classic looks.
  • A bit pricy.

Truvativ Hussefelt Mountain bike Stem

This is an arrangement you cannot beat, particularly for the short 40-60mm stem that is developing increasingly famous. This stem likewise works for a dominant part of bars and forks that are available so it is flexible. Not exclusively is it an incredible piece on an AM rig, yet It has also been seen this precise stem on various earth jumpers.

Not once have I at any point found about anybody breaking a Hussefelt stem, these things are quite solid and burly. The level dark completion is perfect and the decals are not stickers, they are painted/stenciled on. You will feel as though you ought to have paid threefold the amount of for this stem.

The most preferred part about this stem is the crude completion on the front that spells "Hussefelt". It gives it an entire top of the line look that is additionally one of a kind. The jolts that unite everything are first class and add to the nature of the stem. In the event that you are not a weight Nazi endeavoring to shed each ounce you can. I don’t think there is any reason not to purchase this 203-gram stem. 

This is an ideal stem on the off chance that you are attempting to keep it shoddy and still appear as though you realize what you are doing. Which is actually quite difficult.

Things we like:

  • Relatively cheap.
  • You can use 5mm Allen bolts.
  • Sturdy build.
  • check
    Strong clipper.
  • Pretty cool logo.

Things we don't like:

  • Pretty heavy though.
  • Not anodized.

RaceFace Ride Mountain Bike Stem

An ideal complement to your Ride bar and seat post. The Ride stem is structured explicitly for riders searching for Race Face designing and quality at an esteem value point. This stem is pleasantly structured. Its appearance is so appealing, and it is an ideal match for any off-road bicycle. 

The clamp configuration is a four jolt one. This will serve to upgrade most extreme verifying in the situation of the stem to your bicycle.

The stem comes in dark shading making it mix well with some other shade of your bicycle. In the event that you are a woman, and your worry is shading, at that point this stem meets your requirements.

The material it is produced using is aluminum 6061. It is fashioned and peened making it offer high quality and exhaustion obstruction at a sensible cost. The stem is, subsequently, sturdy.

The stem weight is not as much as Race Face React Off-road Bicycle Stem gauge. It weighs just 140 grams making a pleasant choice for long separation riders. As it will offer less protection from the breeze since it doesn't add more weight to the general load of the bicycle.

Since it features the most common handlebar diameter 31.8 mm, it will fit with any kind of cycle. The clamp is made of 4 bolts so you have to take special care to it. You have to lose all the screw equally and also tight them equally.

Things we like:

  • Versatile.
  • Attractive design.
  • Easy to install.
  • check
    Compatible for extreme export.
  • Expensive looks.

Things we don't like:

  • Available in longer lengths.
  • No raise capabilities.

Renthal Apex Stem

This Renthal Apex Stem consolidates all-mountain quality with enduro firmness at a lightweight. It is the fundamental factor for cross-country. This MTB stem is a cross breed of the extraordinary segments fundamental for an incredible off-road bicycle ride

With special 240-degree handlebar clips that permit a great part of the stem body material to be evacuated. Which means this MTB stem tips the scales at 118 grams. The Apex Stem holds the quality and firmness requested by current, wide handlebars. It includes completely CNC machined and highlighting a larger than average focus bore. It has broad 3-D machining and outer webbing to augment auxiliary quality and solidness. This Renthal Apex Stem is a major move up to a little part. 

The Renthal Apex is CNC machined from a strong billet of 2014 aluminum with 7075 aluminum braces. These materials were picked with care, to give the most astounding solidarity to weight proportion. The clips are embedded over the little width area of the handlebar and slid into the inside. It gives a 240-degree wrap of the handlebar. 

The stem body can be turned to give either an in addition to 6 degree or short 6-degree rise. This enables the right bar tallness to be accomplished with any wheel size or head tube length. Broad 3D machining and outer webbing increment the torsional firmness of the stem, while downplaying weight.

Things we like:

  • Top notch craftsmanship.
  • Unique design.
  • Light style.
  • check
    Extremely light.
  • Delicate finish.

Things we don't like:

  • Not too strong.
  • Design somehow looks weak.

How To Choose Mountain Bike Stem (buying guide)

The correct stem for your MTB bicycle will rely upon various components. The most significant being the stem type, materials, and measurements.

MTB stems set up on handlebar

Stem type

By far most of the MTB stems available today are of the Aheadstem configuration. Which jolts legitimately onto a fork's steerer tube. The module plume configuration can be found on more established or less expensive bicycles

Stem materials 

Aluminum alloy still by a long shot the most widely recognized stem material in low-to mid-spending stems. Yet carbon fiber models are accessible at the top end of the market. They shine with their allure for the most part among racers both on-street and off. 

Measurements

Stems are accessible to fit a scope of steerer tube sizes with 1/8" which is most widely recognized on both MTB and street bicycles. Be that as it may, a few models are additionally accessible for more established bicycles. They come with 1" steerer or for gravity bicycles with 1.5" steerer tubes. 

A scope of brace sizes is likewise accessible to fit the distinctive handlebar breadths. MTB bars are generally 25.4mm (standard) or 31.8mm operating system in breadth. With the last standard now really the most recognized inferable from its properties of solidarity and firmness.

How to choose the best stem length for you?

It is a three-way process:

Stage 1

Lift your leg over the bicycle to straddle the edge. Lower yourself onto the seat, and spot your feet level on the floor. Broaden your arms toward the handlebars, and grab hold of the grasps.

Stage 2

Analyze the ebb and flow of your arms to decide whether the stem relates with your physical measurements. Pick a stem that is 20mm to 30mm littler if your arms should completely stretch out to achieve the handlebar holds. Overhaul the measure of the stem if your arms twist at not exactly a 45-degree edge. 

Stage 3

Select a stem as indicated by your kind of biking. Utilize an 80mm to 120mm stem to guarantee a streamlined riding position on cross-country, MTB landscape. Select a stem with a shorter length for expanded dealing with and solidness on a declining MTB course. Pick a model that includes a progression of spacers in the event that you have to change the length of your bicycle stem effectively and rapidly.

What is the best width for mountain bike handlebars?

The width of the mountain bike varies in many aspects. One is bike wise & other is body wise.

Bike wise

XC Bicycles: 680mm - 740mm bar width 


For XC bicycles, utilizing a more drawn out stem improves position on the bicycle to put out more power
proficiently. Smaller bars are utilized for this situation to keep your chest open when inclining forward in a climbing position.

Downhill Bicycles: 760mm - 800mm bar width

For downhill bicycles, utilizing a more extensive bar gives you a decent steady feel. You have more influence in the corners, and that all give you the certainty to ride all the more forcefully. Consider more extensive handlebars as having power control for your vehicle. 

Enduro Bicycles: 740mm - 780mm bar width

Handlebar widths for enduro bicycles are someplace in the middle of the two. From standard trail riding to the Enduro World Arrangement, having handlebars that give you the control. And steadiness on the downhill alongside being in an ideal accelerating position should be the case.

Body Wise

It is essential to locate the correct handlebar width ideal for your body type and riding style. 

For shorter riders​

It is just normal to utilize smaller handlebars. Consider completing a push-up. On the off chance that your hands are a lot more extensive than your common position. You end up working a lot harder to complete one push up. Presently if your hands are near one another, again it's unnatural and entirely flimsy. Locate an agreeable center ground for your body type and think about what kind of riding you will do. 

For taller or lankier riders

Utilizing a more extensive bar may be only the trap. A similar hypothesis applies here. On the off chance that you are tall with long arms, utilizing a more extensive bar will get you in a progressively normal riding position. And will give you more control over the bicycle.

How does a shorter stem affect bike handling?

Changing the stem length not just effects your fit and solace, it influences the handling elements of a street bicycle. A shorter stem will result in snappier directing, a more extended stem will deliver slower controlling. Altering the stem length can be utilized to tailor the handling. That is for the most part why cyclocross races utilize a shorter stem, and long separation street cyclists decide on a more drawn out stem.

How do you measure handlebar diameter?

Take a piece of paper, crease it around the thickest part of the bar and mark the spot on the paper where the two finishes meet. At that point put the paper level, and measure from the conclusion to the mark you made. That will give you the outline. Divide that by 3.1416 and you'll have the width. This isn't excessively exact, yet there's just a little arrangement of sizes to choose.

How do you measure handlebar diameter

Conclusion

A bicycle stem may seem like a small part of the cycle. But actually, it is one of the most important parts. It will give you comfort as well as safety. That’s why choosing the best mountain bike stem is very necessary. You may not know anything about cycle stem. But, I really hope after finishing this article you will have a catch on how stem works and how to choose them. We have discussed many types of the stem, like shorter to longer stems, muscular to thinner build. Carefully read through the article and choose what is best for you.

Best Mountain Bike Handlebars Reviews

10 Best Mountain Bike Handlebars Reviews – Top Selection By Experts

Introducing 10 Best Mountain Bike Handlebars

To make your rides on the mountain thrilling and exciting, there is no more alternative of a comfortable, stiff and strong mountain bike. And one of the basic components that define its strength is the handlebar. 

Just because of choosing a wrong handlebar, the chance of accident raises to a significant rate

But as there are tons of options and brands to chose from, it’s pretty easy for anyone to make a wrong purchase decision. 

To give you a hand, we’ve come up with a list of best mountain bike handlebars. Let’s go through and pick up the right one for you-

10 Best Mountain Bike Handlebars Reviews

Comparison Table Of Mountain Bike Handlebars

Products

Materials

Sizes
(Millimeter)

Our Rating

Check Price

Quality carbon fiber

640,660,680,
700,720,740
Millimeter

4.5 out of 5

Aluminum alloy

640
Millimeter

4.5 out of 5

Ultralight unidirectional carbon fiber

640,650,660,
670,680,690,
700,710,720
Millimeter

5 out of 5

7050 Aluminium alloy

780 Millimeter

4.0 out of 5

7050-T76 aluminum,

6061 alloy

740 Millimeters

4 out of 5

Carbon fiber

785 Millimeters

5 out of 5

Aluminum alloy 6061

700 Millimeters

4.5 out of 5

Seamless Air Alloy Aluminum

725 Millimeters

4.5 out of 5

Unidirectional carbon fiber

720,725 Millimeters

5 out of 5

Unidirectional carbon fiber

800 Millimeters

5 out of 5

RXL SL Carbon Fiber Handlebars

Product Overview

Welcome to the #1 ranked best mounting bike handlebars. The winner of our list is- RXL SL Carbon Fiber Handlebars, and we will tell you every reason behind it.

First of all, there are people who like bent handlebars, and there are people who like it to be straight. As one particular model can’t be both at the same time, there are likeness and unlikeliness in case of each of them. 

For the first time, we’ve been able to pick up a model that comes in both versions. You can have the same design and materialistic strength either in a bent version, or a straight version

The product we’re talking about is made of high-quality carbon fiber, which is recognized as the best kind of metal ever used on mountain bike handlebars

Even more surprising fact is, the price point of this product had not risen up because of the material. Which was unexpected and surprising at the same time!

Moving forward, it’s a 640mm long bar, which indicates that it’s for medium-sized and short-sized bikes only. If you want, there are other versions which are 660mm, 680mm, 700mm, 720mm and 740mm in length. The clamp diameter is 31.88, which is normal.

The appearance and color-scheme of this handlebar are pretty impressive. And mounting this beautiful bar is also super easy. All you have to do is selecting the right size and shape for your bike, and you’ll be on the top of the earth.

Things we like:

  • Made of super strong, and high-quality carbon fiber.
  • A cool and vibrant appearance.
  • Comfortable for all kind of users.
  • check
    Available in both bent and straight design.
  • check
    A wide range of lengths to chose from.
  • An amazing price-quality ratio.
  • A range of colors to chose from.

Things we don't like:

  • The bending angle should have been shallower, in some cases.

XLC Riser-Bar 50mm height

Product Overview

If you want to bring a change in the riding posture of you as a rider, XLC Riser-Br 50mm height can be your next lucky choice.

This is a superb quality handlebar which fits both mountain bikes and road bikes. The best part about this handlebar is, it gives you such a lift to ride much more comfortable on your bike.

The material used to built this handlebar is an aluminum alloy of export grade quality. No matter how rough you ride on your bike, the structure will remain all the same.

It’s bent at a certain angle to provide the right body posture while you are riding on your mountain bike. As a result, it will be quite an exercise to ride on this bike.

On top of that, the budget for this product is quite cheap. For riders who don't want to break the bank for a handlebar, and still want to get the most out of their bike, XLC Riser-Bar 50mm height can be the go-to choice

Things we like:

  • Super sturdy, aluminum alloy construction.
  • 630mm in length.
  • Shiny and stylish black mat color.
  • check
    Bent at a perfect angle to maintain body posture.
  • check
    Gives a lift while riding on the bike.
  • Strong built quality along with durability.
  • A good pick for the money.

Things we don't like:

  • Not adjustable sides as many other handlebars.

Renthal Fatbar Lite Carbon

Product Overview

The product of the moment gives us quite a unique design throughout the entire length of the handlebar. And it is bent at a certain degree for comfort riding. The name of the model is Renthal Fatbar Lite Carbon and it comes with quite a lot of surprising features.

First of all, the rise of this product is 10mm. And the width is 780mm. The bar clamp diameter is 31.8 mm. If you are familiar with calculating the size and structure ratio of handlebars, you will certainly understand that such kind of dimensions is just perfect for any rider any mountain bikes

However, if you are looking for a higher rise, there are also 20 mm, 30 mm and 40 mm right available for purchase. Also, you have a number of options to set as long as the width of this handlebar is concerned. The minimum width is 640 mm. But you can also set it to 650 mm, 660 mm, 670 mm, 680 mm, 690 mm, 700 mm, 710 mm, 720 mm and finally 730 mm.

Overall, we can say that it is one of those very few handlebars that gives you a handful of options to adjust the length and rise of it.

Moving forward from the adjustability to the design. As you can see in the picture, the gold and black combination is really beautiful and cool looking if you think about mounting it on your bike.

The material used to manufacture this product is pretty much strong and study. You can say, it a promise of durability for at least a few years.

Because of the structure, material, and design, the price point had gone to higher compared to mid-range and low range budget. So you have to spend some extra bucks if you really like the design and structure of this handlebar.

Things we like:

  • 10 mm to 40 mm size options.
  • Cool looking handle along with black and gold color blend.
  • 780 mm of width, perfect for any users or any bike.
  • check
    A good product to maintain body posture.
  • check
    Compatible for both riders and racers.
  • Good balance of weight, strength, and stiffness.

Things we don't like:

  • No protective layers or coats.

FIFTY-FIFTY Aluminium Alloy Mountain Bike Riser Handlebar

Product Overview

FIFTY-FIFTY Aluminium Alloy Handlebar is designed for mountain bikes in particular. The length of this Aluminium handlebar is 780 mm. There are two kinds of rises that you can find in it- 20mm rise, and 35mm rise. 

What matters the most when it comes to mountain bike riser handlebar is the materialistic strength. As the core material to build up this handlebar, 7050 graded aluminum alloy has been used. And it gives us a promise of long-term durability.

Moving forward, this is a bent type bike handlebar, and it had been bent with a numerically controlled method. From any viewpoint, the bending will look 100% precise. The angle it is bent at is- 5 degrees top, and 9 degrees back.

As a part of the mountain bike, the handlebar is going to be exposed to extreme weather conditions. The list includes water splashes, rain, muds and so on. To provide a layer of protection against all of this odds, these are perfectly anodized. Having a layer of anodized material on top of 7050 aluminum, we can assure you that it is going to last for at least a few years.

For discussing in this review, we have picked up the 20 mm rise version. In case you need a higher rise, there is another 35 mm model as well. Apart from the rise, there is a difference between the angle of both models. The 35 mm question comes with an angle of 5 degrees top and 7 degrees back.

Lastly, we’re concerned about the weight as well. But the weight came to be as low as 287g(20mm) and 309g(35mm). 

Things we like:

  • Made of 7050 Aluminium alloy.
  • Hard anodized layer on top of the allow.
  • The weight is as light as 287g.
  • check
    The bending angle is 5 degrees top and 9 degrees back.
  • check
    Double butted for enhanced usability.
  • 20mm rise and 35mm versions are available.

Things we don't like:

  • No wide variation in rise level or width.

RaceFace Chester 31.8 1 inch Riser

Product Overview

If you want to ride wild on your mountain bike, you have to make sure that your bike is equipped with topnotch gears. One of the most important part to look up for is the handlebars. At this point of the list, let's call up RaceFace Chester 31.8 1 inch Riser on the podium.

This festival is made of 6061 alloy, which is a tough quality metal used to build any kind of handlebar risers. Making sure that the material quality is good, the manufacturer focused on the perfect width, rise, and sweep

The design has been made to ensure a perfect and optimal strength to weight ratio. The construction is wide enough to fit for any kind of bike and the bike riders as well. Wide construction and redesigned tapper with you to have firm control and stiffness on your bike.

For high impact strength and fatigue resistance, the alloy is cold drawn when building. The length of the handlebar Riser is 740 millimeters. Talking about the angle, it is 9 degree on the rear side and 6 degrees on the upper side.

One tiny drawback of this product is its weight. Where we have seen usual models to lie within 300 grams, this one comes with a weight of 400 grams. This will lead to a lack of stiffness when you are riding on the mountains.

Things we like:

  • Made of tough built 6061 alloys(cold drawn).
  • 740mm of length.
  • 9-degree upward angle and 6-degree rearward angle.
  • check
    Made to provide high impact resistance.
  • check
    Good amount of fatigue resistance as well.
  • Butted for achieving optimal strength to the bike.
  • Wide and stiff construction.

Things we don't like:

  • 400g of weight is a little above the bar.

RaceFace SIXC DH Handlebar

Product Overview

RaceFace SIXC DH Handlebar is the next pick of our list of 10. 

So called him this review, we have tried to maintain a good strength along with a decent price-quality ratio. But if you want to go an extra Mile with the strength of your handlebar, you have to raise the budget a little bit and try something made of carbon fiber.

Yes, RaceFace SIXC DH Handlebar has used Carbon fiber as the basic construction material. And obviously, he has its perks.

Along with tough construction, it is a piece of unicorn as long as you consider the weight and strength ratio. Due to the carbon engineering, it can undergo any kind of free riding on mountains or any rough terrains.

The length of this handlebar is 785 mm, and the bar diameter is 31.8 mm. The angle is 90 degree at the rear side, at 4-degree act upside. And the best part is its weight. Providing all of the qualities and strength you want from the handlebar, it weighs only 220 grams. You can see how much lightweight it is comparing to other models in this list.

When it comes to designing your mountain bike, everyone can have different color and style choices. On that consequence, this handlebar comes in five different colors. Based on the color scheme of the rest of your bike parts, you can choose the best fit with ease.

For such a top quality mountain bike handlebar, there are obvious reasons to spend a few more bucks. What do you think in this regard?

Things we like:

  • Made of heavy duty Carbon fiber.
  • 785 mm length with ample width.
  • 90 degree at the rear side, at 4 degrees at the upside.
  • check
    Comes with 5 different cool color options.
  • check
    Reinforced climatic zones.
  • Ready to undergo any harsh and destructive situations.

Things we don't like:

  • The best quality ratio is rain over the Top.

UPANBIKE MTB Mountain Bike Bicycle Extra Long Handlebar

Product Overview

Up next, we have UPANBIKE MTB Mountain Bike Bicycle Extra Long Handlebar to discuss. Let’s look up at its features and benefits-

Like any other good quality mountain bike handlebar, this one is also made of aluminum alloy 6061. The length of the handlebar is 700 mm, and the length seems to be perfect for shorter people.

The clamp diameter is 31.8 millimeter and the bar and diameter 22.2 mm. The benefit of having a narrow bar end is in its controllability. The strength of the joint between the clamp area and your bike will be stronger in this way.

The Riser is of 30 millimeters, and the sweep back angle is 90 degree. As long as regular mountain bikes are concerned, both of these dimensions are perfect.

To let you choose the color of the handlebar according to the color of your bike, there are five different options to consider. You can find the best fit from any of these five.

Lastly, let's talk about the price-quality ratio. In terms of price, it is extremely budget friendly. If you are looking for an aluminum alloy handlebar within a low budget, our recommendation will go with UPANBIKE MTB Mountain Bike Bicycle Extra Long Handlebar.

Things we like:

  • Made of aluminum alloy 6061.
  • The handlebar light is 700 mm.
  • More space to install different bike accessories.
  • check
    31.8 mm clamp diameter.
  • check
    22.2mm bar end diameter.
  • 30mm rise along with 9 degrees sweet back angle.
  • Five different color choices to pick from.
  • A good price.

Things we don't like:

  • The thickness of the metal body could have been better.

Race Face Turbine Mountain Bike Handlebar

Product Overview

After a number of bent mountain bike handlebar, we have come up with a hand work which is completely straight. The model is called Race Face Turbine Mountain Bike Handlebar.

What is the benefit of a straight handlebar instead of a bent one? well, it completely depends on personal preference. But a straight handlebar lets, you stretch your body more than what a bent handlebar would do. This is good for maintaining a good body posture when you are riding on your bike.

The material of this handlebar is alloy aluminum, And it is completely cold drawn. The benefit of Having a coldly drawn handlebar structure is, it is very likely to stay stiff and rigid even after years of use.

To increase the fatigue life, the handlebar is shot peened by the manufacturer before releasing. On top of that, it comes with extra strength to weight ratio as it is butted.

The handlebar is 31.8mm in diameter, and the rise angle is 0 degree. The logo that is printed on the bar is heat-treated. So, that adds on another layer of excellence in the outlook. 

There is another particular feature that you would find awesome, and it is the weight of the handlebar. The total weight of the handlebar is 170g, which is insanely low comparing to many of its competitor products

So, the overall building quality, the weight, and the design- everything points towards its effectiveness as the best mountain bike handlebar. Hopefully, you’ve liked the features as well.

Things we like:

  • Made of cold-drawn Air Allow Aluminium.
  • Enhanced fatigue life.
  • Butted to create a good strength.
  • check
    Good for body posture.
  • check
    Extremely light in weight.

Things we don't like:

  • Not a good fit for people who like bent handlebars.

RaceFace Next Handlebar

Product Overview

On the podium, we have RaceFace Next Handlebar to talk about right now. The reason we have selected this product in this list are- its unique design and amazing build quality. For mountain bike riders who are a professional or semi-professional racer, may find it as a perfect fit.

The width of this handlebar is 720 mm, but there are a number of other options to choose from as well. The Rise is ¼ inches, which is pretty fine. the clamp dimension is 31.8 mm and that quiet matches with the other dimensions of the product.

Now, we are pretty much happy to announce that this product is the lightest mountain bike handlebar that you can find in our entire list. The weight of this product is only 135g, which is more than awesome.

As we said at the very beginning, the product is made for mountain bike riders who are obsessed with racing. As the weight of this product is too light, it will add almost no wait for the bike body. So you can run as fast as the storm does.

To make sure that, you don't end up with the wrong mounting technique, there is a reinforced anti-crush zone printed with the clamp area. Also, you will be provided with a list of installation advice.

The finishing of this handlebar is quite smooth. Even, the logos and the text printed on it don't add any texture that might bother you when you are riding.

The build quality is quite satisfactory, and we have seen users claim that they are using this handlebar for years now. We hope that you can also be one of those happy customers if you make up your mind to go for this best mountain bike handlebar.

That was all we have to say about this product. Let us know about your thought.

Things we like:

  • Handlebar made for mountain bike racing particularly.
  • 720 mm of width, with several other options to choose from.
  • Extremely lightweight, only 135g.
  • check
    It has reinforced the anti-crush cross zone at the clamp area.
  • check
    Smooth and beautiful finishing.
  • Compact in size, but perfect for any kind of mountain bike.

Things we don't like:

  • No angular bent throughout the entire handlebar.

Renthal Fatbar Carbon 35 Handlebar

Product Overview

We have eventually reached at the very last product of our list of 10. We did not want to keep the list within 10 product only, but we have to. However, the product we have in mind for the moment is Renthal Fatbar Carbon 35 Handlebar. Let's talk about its features and check out what it has got to show us-

First of all, there are four kinds of rising options in this model. And they are- 10 mm, 20 mm, 30 mm and 40 mm. Based on what kind of rise you want, you can pick up the best one.

Moving forward from the rise to the width. The width of the handlebar is 800 mm. As you have seen throughout the entire post, it is kind of the largest. So if you are a tall person, and you need a wider area to grab on your mountain bike handlebar, this one can be a good fit for you.

The diameter of this handlebar is 35 mm, which seems regular. And the angles are 5-degree upsweep and 7-degree back sweep. It's not too much bent or too much straight. You can call it a combination of both bent and straight design.

The material used to prepare this product is unidirectional carbon fiber. If you are a regular mountain biker, you might have enough idea about Whats such a materialistic quality can give you in action.

As the material used to create this product is quite expensive, the price has got a little higher than what we expected. In fact, the price-quality ratio is one of the reasons that kept us back from providing a higher rank for this product.

However, if budget is not your problem, you can definitely think about keeping this product in your shortlist.

Things we like:

  • 10 mm rice with several other options to choose from.
  • 35 mm diameter, perfect for any mountain bike.
  • Made of unidirectional Carbon fiber.
  • check
    800 mm width, largest of them all.
  • check
    A beautiful design with a cool color scheme.
  • A combination of bent and straight type of handlebars.

Things we don't like:

  • The price is excessively high.

How to Choose the Best Mountain Bike Handlebars?

Getting the best mountain bike handle can be really difficult for new buyers. As there are a number of things to look up, you may need a helping hand. At this section, we're going to give you a list of buying guide below.

mountain bike handlebars

Buying Guide for The Best Mountain Bike Handlebars

Thanks for going through the entire list of mountain bike handlebarsHopefully, we’ve liked it and already made your buying shortlist. To help you up with the final decision, here is a comprehensive buying guide-

1. The Design

The first factor that can be important is design. Although, for many of us, the design can be also at the top of the priority list. You may see some of the models to have printed designs on the handlebar, and some brands like to engrave the logo in the body itself.

2. Handlebar Types

Handlebars can be of both bent type, and some are straights as well. As you know, bent type handlebars can be perfect for maintaining a straight body posture while driving. On the other hand, straight handlebars are more likely to give you a straight posture. Based on what you prefer, you should make the right choice. 

3. The Shape

Of course, the first and foremost factor to take in consideration is the shape of the mountain bike handlebar. There are straight, bent and semi-bent shapes as long as convenient handlebars are concerned. Chose the best one based on what body posture you want while riding on the bike. 

4. The Material

Apart from the design, the material is also important. The durability mostly depends on the material of the handlebar. As you have seen in our list, aluminum is the best kind of material available. If you want to raise the price a little bit, you may go for carbon fiber. They are way stronger and more durable.

5. The Length

The length can be sometimes a reason of headache for you as a mountain bike rider. In that case, you may choose a mountain bike length that can be cut according to your preference.

6. The Width

The width is the dimension on which you’ll grab the handle of the bike. Based on the size of your mountain bike and your own body, you should set the priorities of width. Usual width is around 600-800mm.

7. The Element

The strength and durability are defined through the element in case of this product. Most of the products are made of alloys, which is quite fine. If you want to go the extra mile, you can choose carbon fiber as the material. 

8. Price-Quality Ratio

The last, but another important factor is the price-quality ratio. We know that you don’t want to compromise the quality of the bike handlebar, but the price depends on a number of factors. The material, the design, the length- etc. are the deciding factors in this case. 

How to measure mountain bike handlebars?

To measure the handlebar of a mountain bike, you may need to have a caliper. This is a pretty useful tool to use and measure the handlebar dimensions directly

Otherwise, you can try with taking a strip of paper and fold it around the bar at the center. Now, mark the place where the two ends meet. Finally, put the paper flat and measure the ends of the mark.

How to measure mountain bike handlebars

What is the handlebar sweep?

Handlebar sweep is the angle at which your mountain bike handlebar bends back. This angle is essential to provide the rider with a comfortable grip and body posture.

There are two kinds of sweep- backsweep and upsweep. Upsweep is the angle at which the bar bends up from the stem. And backsweep is the angle at which the bar bends back. Both of the angles are essential for a rider to know. 

Why rise handlebars is best for a mountain bike?

Mountain bike handlebars are usually sized at any rise between zero(flat) and 100mm. Although both zero rises and 100mm rise are not available in these days.

If you ask us about the best handlebar rise, our answer would be a 40-50mm range. In terms of inches, the range is within 1.5-2 inches. 

Bottom Line

Finally, we’re at the summary line of the whole article. We’ve tried to be as diverse as possible when it came to selecting 10 best mountain bike handlebar for this article. Hopefully, the list had been able to satisfy you. 


May You Like Them

best mountain bike forks reviews

Best Mountain Bike Forks Reviews 2019 – For Your Comfortable Aspiration

Introducing Top 10 best mountain bike forks

Starting from 1817 until now the journey of the bicycle is kind of revolutionary. To reduce the pain and increase the comfort of the rider many interesting inventions were made. One of the best inventions was suspension fork. The first mountain bike fork was introduced in 1990. It was a leap of 100 years for the cycling community. Because of the suspension fork which was specially made for the mountain bikes are the one that makes mountain riding safe and more comfortable. Though it’s not mandatory that suspension fork is only needed in mountain bike. A fork is an essential tool of any cycle. Whether you are riding off-road tracks or riding on a bumpy road, a fork will bring you comfort and ease. Since today’s fast-paced world many companies make suspension fork. And choosing the best mountain bike fork is also a very tough job. But rest assured we have collected 10 best mountain bike forks for you to choose.

10 best Mountain Bike Forks Reviews

Comparison Table Of Mountain Bike Forks

Products

Brake Types

Materials

Our Rating

Check Price

Disc Brake

Aluminum

5 out of 5

Disc Brake

Aluminum

4.5 out of 5

Disc Brake

Aluminum

5 out of 5

Disc, Linear Pull

Steel alloy

4 out of 5

Rim, Disc Brake

Forged 6061 T-6 Hollow Aluminum

5 out of 5

Disc,Rim, V Brakes

Forged 6061 T-6 Hollow Aluminum

4.5 out of 5

Disc Brake

Magnesium lowers,Steel alloy

5 out of 5

Disc Brake

Magnesium lowers,
Aluminum alloy

3.5 out of 5

Disc, Pull breaks

Aluminum & Steel

3.5 out of 5

Disc Brake

Aluminum

3 out of 5

mountain bike forks

SR Suntour MTB Disk Fork XCT

The SR SUNTOUR XCT fork is the best entry level fork of SR SUNTOUR. It comes with a mechanical lockout damping. This XCT fork uses a coil spring which is the main functional part of this fork. The travel distance of this fork is 80mm to 100mm. Which means it can take a bump from 80mm to 100mm. The axel is 9mm wide. This fork is only made for disc brake. It says you can easily setup disk break with this fork. But without cutting or using any additional means, you can’t install anything else. The lower body of the fork is made of aluminum. The color of the fork is gloss black. As an entry level fork, the weight is quite good which is 5.7lbs or 2.58kg. It is made in Taiwan. It comes with a one year warranty.

Things we like:

  • The lockout is very good.
  • The easy preload adjustment is quite handy.
  • Made for slight bumpy roads or everyday high ways.
  • check
    Good for city rides.

Things we don't like:

  • Leakage of oil.
  • Not suited for downhill, uphill or too much bumpy roads.

Manitou Markhor Fork 29" 100mm

Manitou is one of the respected fork providers. Their fork’s really live up to the name when it comes to handling hard terrain. Markhor 29” 100mm fork is another awesome product of them. From the name you can guess that the fork is for 29” wheel size. The travel distance is 100mm. The hub spacing of this fork is also 100mm. Manitou uses TS air spring in Markhor fork. At the bottom out you will find a progressive rubber bumper. The crown is made of aluminum. The offset of this fork is 51mm. That is pretty impressive for a fork in this price range. The compression damping is made with a technology called Kwik Toggle. And in for the rebound damping, there is adjustable TPC. The leg diameter is 30 mm wide. A grade aluminum has been used in the leg. The axel is 9mm wide. It comes with matte black.

Things we like:

  • Rebound adjustment at the bottom.
  • It is a light fork.
  • Good for an off-road ride.

Things we don't like:

  • Fall of a bit at rough terrain ride.
  • Rough downhill and uphill will also be a problem.

Fox 32 Factory Float FIT Terralogic Fork 29" 100mm

The Fit Terralogic is a very lightweight and sturdy fork. This fork is suitable for any types of riding. Fox Factory uses terralogic technology in this fork. This is a kind of automated technology. It will help you to adjust the fork along with road condition. So it’s like, you are relieved from one crucial job to improve every time the track changes manually. The travel distance 100mm. The steerer is between 1.12”-1.5”. It’s a very adjustable fork. You can adjust the lever-actuated lockout, air spring pressure. Even you can also control the rebound. The damping is FIT remote lockout. It has an offset of 44mm. The length of the steerer is 265mm and axle is 500mm. The weight of the fork is 1700g. It comes with gloss black color and grey logos. The legs are made of aluminum. The fork is made for disc brakes. It is suitable for 29” size tire. 

Things we like:

  • The weight is pretty good.
  • The installation process is relatively easy.

Things we don't like:

  • Sometimes too many adjustments can be pretty rough.
  • Pretty expensive.

SR Suntour XCM Suspension Fork 26"

The SR SUNTOUR XCM comes with an elegant design. This unique and beautiful design of Suntour XCM will help you to ride the casual off-road tracks with ease and style. To get perfect result in the hill tracks, this fork has been introduced. It is made from quality allow. It will help lower your post di